Developed for all applications, where the injured in the rescue bag needs to be fixated to the cabin or the stretcher.
The belt system of this rescue bag has two shoulder, one hip and
one leg - fixation belts. With this system, the injured can remain in the
rescue bag and on the vacuum mattresses and still is fixated according
to the aviation regulations.
Every belt is closed individually with adjustable aluminium buckles. The corresponding
belts are made in different signal-colours. Therefore, the belt system can
be attached to the injured quickly and easily.
The belt system is attached to the bag on two strong belts on both long sides
of the bag. These belts again have 6 attachment loops ( one in each corner
two on the sides). With these loops, the whole system with the injured can
be connected to the hard-points in the cabin or on
a stretcher.
Design, materials and suspension are equal to our standard helicopter rescue bag.
For the ready-for-the-mission transport of the helicopter
rescue bag, the vacuum matress and the pump. The transport bag can be carried
like a backpack with its retractable shoulder and hip belts or hooked to the
harness of the rescuer when he is on the hoist under the helicopter.
The helicopter rescue together with the mattress is laid 3 times folded into
the transport bag. Due to the running around zipper, the material is immediately
ready for action.
The transport bag is manufactured from water- and wind resistant nylon fabric, the back - area with the carrying best attachments are made from specially strong Cordura fabric.
